Published by Todd Bush on December 20, 2024
Researchers from Aarhus University (AU) have developed a new technology that uses microorganisms to convert the CO2 in flue gas directly for new purposes—for example fuels or substances for the chemicals industry.
The technology can exploit CO2 as a raw material, unlike conventional carbon capture and storage (CCS), which captures carbon from flue gas and converts it into solid matter that can then be stored underground, for example. The research has recently been published in the journal Nature Communications.
"In a net-zero future, we need to use technology that recycles the CO2 we capture instead of continuing to extract more from the ground," says Amalie Kirstine Hessellund Nielsen, a Ph.D. student at the Department of Biological and Chemical Engineering and one of the main authors behind the research.

Process diagrams of conventional CCU and BICCU.
>> In Other News: Ocean-Based Technology: Capturing CO2 and Producing Hydrogen
Globally, CO2 from flue gases is the biggest contributor to higher concentrations of greenhouse gases in the atmosphere. It is also one of the most problematic point sources to get rid of, because the CO2 in flue gases from industrial chimneys, for example, is mixed with other gases and therefore difficult to remove without major additional costs.
This new technology is based on carbon capture and utilization (CCU), where so-called amine scrubbing removes CO2 from flue gases using chemicals that bind the CO2. In conventional carbon capture, the carbon is separated from the chemicals at high temperatures in a closed circuit. The concentrated CO2 can then be refined further in other demanding processes.
The alternative technology proposed by the researchers from AU is a new form of bio-integrated carbon capture and utilization (BICCU), whereby carbon is reused directly in the circuit, avoiding many of the conventional intermediate process steps. The researchers at AU use microorganisms that both remove and convert CO2 from the flue gases directly in the capture unit instead of having to apply high heat.
"Microorganisms are hyper-specialized in the process of absorbing and converting CO2 and they have refined this process over billions of years. We exploit this in our bioreactors. So instead of using heat, we add microorganisms that can extract CO2 from other chemicals allowing us to save money on our heating bills," says Mads Ujarak Sieborg, a postdoc at the Department of Biological and Chemical Engineering and the main author of the new research.
The microorganisms absorb the carbon through their metabolism and convert it into other products, such as methane, which can be reused directly in industry.
"What comes out of the microorganisms is green natural gas or acetic acid or other chemical building blocks that industries can use instead of extracting carbon from the ground," continues Ujarak Sieborg.
So far, carbon capture is still a new technology that not many industries have embraced. Biogas plants have started to capture CO2 from their production because of the high fraction of CO2 in waste gases—up to 50%. However, in ordinary chimney smoke from industries, the fraction of CO2 is much less, about 5–10%.
Implementation of carbon capture is so limited because the heating process to separate the carbon from the chemicals is very expensive. The amount of energy it costs makes up about 30% of all the energy that the power plant produces.
Therefore, the researchers hope that the microbiological approach can create a greater incentive for carbon capture, because the costs are much lower, and because the CO2 is transformed into new products at the same time as it is captured:
"The biological process operates at much lower temperatures, and our microbes are resistant to the other gases in the flue gases. But microorganisms need hydrogen for their process, which we get via electrolysis. Hydrogen is the limiting factor in the system today, so there remain some challenges before we have a finished technology, but there are also solutions to the problems. We already have a wide range of different reactors to test—it's primarily a question of putting the system together correctly," says Hessellund Nielsen.
She goes on, "CCU is a small but necessary element in reaching the goals of a green transition of industry and net zero, such that emissions of greenhouse gases and removal of these gases are in balance. However, the technology cannot replace renewable energy sources, which are still the most important tool in the green transition."
Follow the money flow of climate, technology, and energy investments to uncover new opportunities and jobs.
Inside This Issue 🌬️ Spiritus Signs First Three Letters of Intent With U.S. Oil Producers for On-Site CO₂, Representing More Than 3 Million Tonnes of Annual Demand ✈️ Germany's Uniper Signs Offtak...
Inside This Issue ♻️ Vanguard Renewables and Generate Upcycle Unite to Create North America's Largest Food Waste-to-RNG Platform 🌍 Google Is Buying Climate Impact on Two Clocks at Once ✈️ Infinium...
Inside This Issue 🌊 EU's First Full-Scale Carbon Storage Site Goes Live as INEOS Greensand Begins Operations ⚡ IRS 45Z Guidance Reshapes U.S. Biofuel Economics 🏭 Avnos Introduces the Avnos HDAC Mo...
Jacobs Extends Role on German Hydrogen-Capable Direct Reduction Plant
DALLAS – Jacobs (NYSE: J) was selected to extend its role on thyssenkrupp Steel's direct reduction plant in Duisburg, Germany, continuing to provide project management office (PMO), construction ma...
Federal Government Developing Framework for Greater International Cooperation on Carbon Markets
OTTAWA, ON, Sept. 24, 2026 /CNW/ -- With world-class industrial expertise, geology, clean power, abundant natural resources, and a strong policy foundation, Canada has an opportunity to build a glo...
Growth investment supports Xpansiv’s M&A strategy, international expansion, and product development LONDON — 22 September 2026 — Xpansiv, the leading infrastructure provider for the global ene...
Avnos Bets on Modular Manufacturing to Speed Up DAC Deployment
Direct air capture is borrowing a page from the clean-energy playbook: build standardized units in a factory, test them before shipping, and deploy multiple modules instead of redesigning every pro...
Follow the money flow of climate, technology, and energy investments to uncover new opportunities and jobs.