Published by Todd Bush on April 22, 2025
David Perzynski, Honda hydrogen business leader, to present at ACT Expo on April 29 during "Hydrogen Power for Fleets" presentation block
ANAHEIM, Calif., April 22, 2025 /PRNewswire/ -- Fresh from its global debut at the International Hydrogen & Fuel Cell Expo in Japan, the Next Generation Honda Fuel Cell Module will make its first appearance in North America at the Advanced Clean Transportation (ACT) Expo starting April 28. Set to enter production in 2027, the new module will reduce production cost by half while doubling durability and tripling volumetric power density, as compared to the Honda Fuel Cell (FC) module currently in use.
>> In Other News: Think Green. Burn Blue: Rethinking What Clean Energy Looks Like
Honda is concurrently beginning discussions with potential customers for its next generation FC module, set to enter production in 2027. The new module will reduce production cost by half, double durability and triple volumetric power density compared to the current Honda Fuel Cell Module.
The Honda Class 8 Hydrogen Fuel Cell Truck Concept demonstrates the company’s zero-emissions powertrain capabilities.
Honda continues to seek new business collaborations as the company expands its hydrogen business to achieve its global goal of zero environmental impact, including carbon neutrality for all products and corporate activities by 2050.
David Perzynski, assistant manager of Hydrogen Solutions Development at American Honda Motor Co., Inc., said, Honda hydrogen is open for business in North America with the fuel cell technology, the expertise and the supply chain to power a variety of zero-emissions products, including commercial trucking and stationary power generation. Our production plan for the next generation Honda fuel cell module demonstrates our continued commitment to support hydrogen as an enabler for decarbonization.

The Honda Class 8 Hydrogen Fuel Cell Truck Concept demonstrates the company’s zero-emissions powertrain capabilities.
Honda has identified four core domains for the initial utilization of its new fuel cell module: fuel cell electric vehicles (FCEVs), commercial fuel cell vehicles, stationary power stations, and construction machinery. Perzynski will participate in presentation block, "Hydrogen Power for Fleets", on April 29 to provide further insights about Honda hydrogen plans.
Honda will showcase the following zero-emission products and technologies at its ACT Expo display booth (#2927):
Class 8 Hydrogen Fuel Cell Truck Concept: The Honda Class 8 Hydrogen Fuel Cell Truck Concept that debuted at ACT Expo 2024 will be on display supported by a new video highlighting real-world testing of the hydrogen-powered truck on California roads that can be seen here. The operational truck concept is powered by three Honda FC Modules, utilizing the system that also powers the CR-V e:FCEV.
Honda Fuel Cell Module: The module features the current Honda FC system, co-developed by Honda and GM. It advanced performance and doubled durability while reducing cost by two-thirds compared to the previous generation system. It is available for product integration and on sale now.
Honda Next Generation Fuel Cell Module: Honda is concurrently beginning discussions with potential customers for its next generation FC module, set to enter production in 2027. The new module will reduce production cost by half, double durability, and triple volumetric power density compared to the current FC module.
Honda Fuel Cell Power Generator: The Honda Fuel Cell Power Generator is a stationary power system capable of supplying hydrogen-derived, clean electricity to large facilities such as factories, data centers, and offices. It is scheduled for mass production in 2026.
2025 Honda CR-V e:FCEV: the first production plug-in hydrogen fuel cell electric vehicle in America, powered by the current Honda FC system.
Companies interested in collaboration with Honda hydrogen business may contact hydrogen@na.honda.com.
Honda Next Generation Fuel Cell Module Specifications
| Maximum Output (Net) | 150 kW |
|---|---|
| Output Voltage | 450 - 850 V |
| Maximum Efficiency (Net) | 59.8 % |
| FC Refrigerant | Honda Genuine FC refrigerant |
| Hydrogen Gas Composition | Equivalent to ISO 14687 |
| Low Voltage Power Supply | DC24V |
| Module Dimensions | W730 x D580 x H700 mm |
| Volume ・ Volumetric Density | 300 L ・ 0.50 kW/L |
| Weight ・ Weight Density | 250 kg ・ 0.60 kW/kg |
| Operating Temperature | -30̊C - +60̊C |
| Storage Temperature | -40̊C - +60̊C |
| Max Altitude | 3,500 m |
| Ingress Protection Rating | Equivalent to IP67 |
| CAN Communication Standard | ISO11898 |
| Communication Protocol | SAE J1939 / Honda Hi-Speed CAN (selectable) |
| Compatible Communication Speeds | 500kbps |
| Total length/width/height | 8,000 mm / 2,400 mm / 4,000mm |
|---|---|
| GCW | GCW : 37,273kg (82,000 lbs) |
| Top Speed | 70 mph at GCW |
| Driving Range | >500 miles at GCW |
| FC Modules Output | 234kW combined (78kW x 3 FC modules) |
| Hydrogen Tank | High pressure 700bar Hydrogen Tank 82kg-H2 |
| Vehicle Battery | 120kWh High Voltage Battery |
| Usage | Emergency Backup Power Generator |
|---|---|
| Output | Up to four 250kW units (1,000kW total) can be connected It can be configured in parallel based on 4 units to exceed a total capacity of 1,000 kW |
| Rated Voltage | AC 200-480V, 3-phase, 4-wire system |
| Compliant Standards | ANSI/CSA FC1 / IEC 62282-3-100 |
| Startup Time | Within 10sec |
| Installation Environment | Temperature: -25°C – +45°C Altitude: MAX 2,000m / Performance guaranteed 1000m |
| Noise Level | 76dBA (@7m) or less |
*Note: Information based on standard products working under standby operating conditions. Specifications are subject to change without notice.
Honda is transforming its operations to realize its global goal of zero environmental impact by 2050. Through its "Triple Action to Zero" approach, Honda aims to achieve carbon neutrality for all products and corporate activities; utilize 100% carbon-free energy; and pursue resource circulation, the use of 100% sustainable materials by reprocessing products back to raw materials and reusing those materials in the creation of new products. Toward this goal, Honda will strive to make battery-electric and fuel cell-electric vehicles represent 100% of auto sales globally by 2040.
To reduce the environmental impact of its business operations, Honda is offsetting CO2 emissions from its North American manufacturing operations through long-term virtual power purchase agreements (VPPAs) for carbon-free wind and solar power that seek to cover more than 60% of the electricity Honda uses in North America. Honda also supports its suppliers and independent dealerships across North America to incorporate environmentally responsible business practices through the Honda Green Excellence Program and Honda Environmental Leadership Program, respectively.
Learn more at https://www.honda.com/environment.
1 In comparison to the fuel cell system that powered the 2019 Honda Clarity Fuel Cell sedan.
SOURCE American Honda Motor Co., Inc.
Follow the money flow of climate, technology, and energy investments to uncover new opportunities and jobs.
Inside This Issue 🛫 Methanol-to-Jet Clears the ASTM Gate. What Changes Now? 🌿 InPlanet Selected as the Brazilian Supplier in Whirlpool Corporation's Durable Carbon Removal Portfolio 🧲 Climeworks A...
Inside This Issue 🌿 How Montana Renewables Cut MaxSAF Capex 89% 📋 IRS Issues Notice on 45Z Clean Fuel Production Tax Credit to Support Domestic Biofuel Production and American Agriculture 🌊 Natura...
Inside This Issue 🌬️ U.S. Bank Makes First Carbon Removal Purchase with Carba's Minnesota Biochar Project 🏭 Michigan's CCS Primacy Bid Could Reshape Great Lakes Industry 🏗️ Europe's Largest Carbo...
In the largest rice methane offtake to date, Mitti Labs will deliver one million high-integrity credits to Google by 2030 BENGALURU, India and SAN FRANCISCO, Sept. 10, 2026 /PRNewswire/ -- Deep-t...
Climeworks Announces Key Performance Improvements at Mammoth
Over the past 18 months, technology upgrades have more than doubled CO₂ capture performance in upgraded collector containers while reducing operating costs by more than 50%. Zurich, Switzerland | ...
A team member at one of InPlanet’s partner farms inspects freshly harvested citrus fruit to assess its quality Remineralizer integrated into the soil following field application, beginning the enh...
Methanol-to-Jet Clears ASTM Gate. What Changes Now?
Methanol-to-jet has crossed a critical technical gate for commercial aviation fuel. ASTM D7566-26a, the active specification updated July 30, 2026, incorporates methanol into the Annex A5 alcohol-t...
Follow the money flow of climate, technology, and energy investments to uncover new opportunities and jobs.